Page Comparison

This section provides step-by-step instructions for installing Zephyr Enterprise Data Center 5.0 on Linux. This is just one part of a larger setup for Zephyr Enterprise Data Center to be setup and work properly. Please be sure to have read the below sections before proceeding to the steps.

Before you begin

Review all system requirements thoroughly
Have a database installed, running, and configured to connect with Zephyr Enterprise Data Center
- If this is not done, please proceed here to begin database setup
Ensure you have the correct Data Center license file (license.lic) as this will be required during the installation process
- If you do not have this license file, please contact your Zephyr Account Manager or send an email to sales@getzephyr.com
Ensure timezone setting for all nodes are uniform
Download and install required software
- Java JDK 8u101 or higher
  - Download from here
Download Zephyr Enterprise Data Center 5.0 Windows Software:Download from here

Installing Java

Follow Oracle's install instructions linked here. Once installation is complete, set the environment variables and the environment variables and continue to installing Zephyr Enterprise section below

...

For all subsequent nodes, run the installer from the command line using the option to skip database modification, ie:

Code Block
zephyr_56.0_*.sh -VzSkipZephyrSeverStart=true -VzSkipStartupData=true -VzSkipDropData=true

...

Step 2: A quick reminder on the /wiki/spaces/ZEE50/pages/77725729 Requirements needed to install and run Zephyr successfully

...

# sh <Build name> -c Press [Enter], '-c' will start installation through command line.

Step 2. Type 'o' and press Enter to continue.

Image Modified

Step 3. View the requirements for the setup, press Enter.

Image Modified

Step 4. Read "D Software End user License Agreement".

Image Modified

Step 4.1: Go through step by step from 1 to 17 till end of License Agreement.

Image Modified

Step 5. Enter 1 to accept the terms of License Agreement.

Image Modified

Step 6. Select the directory where ZE 5.0 to be installed.

Image Modified

Step 7. Choose deployment mode.

a) If you want to use Single node then Type '1', " Server deployment " and Enter.

Image Modified

b) If you want to use Multiple node then Type '2', " Data Center deployment " and Enter.

Image Modified

Step 8. Type the License file Path.

Image Modified

Step 9. Enter Ports by default its selected to '80' and '8005', if these port are not available can choose any unused port ranging from 1 to 65535.

Image Modified